I Need Help

Kanupling · #1 05-13-2009, 12:26 AM

ok so i bought the Tony Franklin Bass. it has this fret buzz on the E string. But its fretless

ghiadub · #2 05-13-2009, 12:35 AM

Since you have a nice bass, it would be a good idea to pick up a book on setup. I think Dan Erlewine has some pretty good ones.

Here are some to get you started:
http://www.stewmac.com/shop/Books,_p..._electric.html

BTW: it is normal and possibly desireable to have some light buzz, that is what is known as "mwah".

You might try taking to a repair guy, most will check it out and let you know if there is a problem or it just needs an adjustment.

Expect to pay 15-20 bucks if they have to adjust anything.

Kanupling · #3 05-13-2009, 12:40 AM

Can guitar center fix it or something?

) cuz im not really from here. i Went here to get the bass, im just visiting here in the US.

T-Bird · #4 05-13-2009, 04:11 AM

Hi.

+1 for the setup. Perhaps try rising the E-saddle a hair?

Since the bass is new, that rules out worn/gouged FB, and since the bass is new that also hopefully rules out un-even neck.

Obviously I haven't got any experience about GC repair departments expertise, but a quick search will reveal that it seems to be less than stellar.

One reason might be a twisted string. I've encountered that on several basses, fretted and fretless.

Regards
Sam

Kanupling · #5 05-13-2009, 03:26 PM

ow ok thanks dude, uhm what do you mean by twisted string?

T-Bird · #6 05-13-2009, 11:13 PM

Hi.

If the string is wound incorrctly over the machine head post it twists. The result is sometimes weird overtones, echos, delays, etc. but can also result buzz.

You can check that by loosening the string and taking it off from the post completely. The string has to be straight, not wavy, and the end that goes into the tuning post should be oriented in a way that You don't have to twist the string to get it back on.

Sometimes, if the break angle on the bridge saddle isn't too severe, there's a possibility to straighten the bridge end of the string and twist it to line things up. Breaking the string at the witness point is the most likely result though.

Regards
Sam

Kanupling · #7 05-16-2009, 12:36 AM

Got the problem. My Bridge settings is not locked? or like uhm... while i Play. the bridge nuts go down or something like that making my action go down resulting to fret buzzing thing. How do you lock ur bridge settings/?

Kanupling · #8 05-17-2009, 01:42 AM

help?

Foamy · #9 05-17-2009, 01:58 AM

What city are you visiting? Maybe there is a fellow TB'er here with experience who can have a look, or recommend a qualified repair tech.

dmusic148 · #10 05-17-2009, 02:16 AM

Quote:

Originally Posted by Kanupling

Got the problem. My Bridge settings is not locked? or like uhm... while i Play. the bridge nuts go down or something like that making my action go down resulting to fret buzzing thing. How do you lock ur bridge settings/?

If that's what's happening, get a tube of clear silicone sealant from the hardware store, you can get a small single-use packet these days. Remove the screws from the bridge and apply a small amount to the screw threads, and also a small amount, with a toothpick, inside the holes they thread into. Then reinstall the screws, wipe away excess silicone, and adjust the action to where you like it. Once the silicone dries, it will prevent the screws from moving by themselves, but you'll still be able to adjust them if needed.

JustDavid · #11 05-17-2009, 08:02 AM

You could use a drop of clear nail polish on the saddle height setscrews. Silicone's good too but that might be easier to get.

Kanupling · #12 05-17-2009, 10:31 AM

It wont damage my bridge or anything?

JustDavid · #13 05-17-2009, 10:51 AM

If you are asking about the nail polish or silicone on the saddle adjusting screws, no it won't damage the bridge. A small amount should do the job.

Kanupling · #14 05-17-2009, 11:23 PM

ill bring my bass there in Guitar Center. if ever they can't fix it, I'll try your advice