Go Back   TalkBass Forums > Bass Guitar Forums > Bass Guitar Forums > Hardware, Setup & Repair [BG]
Register Rules/FAQ/CUP Members List Search Today's Posts Mark Forums Read



Supporting Membership
Thank You

Latest Supporting Member
Donate to Upgrade Today

Reply
 
Thread Tools Search this Thread
  #1  
Old 12-10-2011, 04:44 PM
Registered User
 
Join Date: Aug 2011
Location: Glenside, PA
Notes won't sound on frets 12-23 (A and D)

Sign in to disble this ad
I play an Ibanez SRX500, and when I try to play notes on the A or D strings on frets 12 through 23, a combination of buzz and a faint 24th fret note sounds. I've tried new strings, but it didn't work.

Is it the truss rod or the fret?
__________________
Hail to the mid scoop!
U.S. Peavey Club #251
  #2  
Old 12-10-2011, 04:55 PM
Registered User
 
Join Date: Dec 2011
From that happening to me, I would say truss rod. However, I am no expert.
__________________
Fighting the Frizzies at eleven.
  #3  
Old 12-10-2011, 05:01 PM
Registered User
 
Join Date: Aug 2011
Location: Glenside, PA
Went through the forums. I think it's the "ski jump" problem.
__________________
Hail to the mid scoop!
U.S. Peavey Club #251
  #4  
Old 12-10-2011, 05:03 PM
Registered User
 
Join Date: Dec 2011
That's most likely it.
__________________
Fighting the Frizzies at eleven.
  #5  
Old 12-10-2011, 09:12 PM
Registered User
 
Join Date: Dec 2007
Location: Milwaukee WI
Could be a ski jump, could be a high fret or bad fretwork....maybe your saddles are set too low on those strings. Kinda hard to make a perfect diagnosis without seeing it but those are some things to look for.
__________________
Wisconsin Bassist Club #3
I've built a bass from rough lumber club #16
  #6  
Old 12-11-2011, 11:59 AM
Registered User
 
Join Date: Nov 2010
Location: San Francisco, CA
As others have said, either way too much neck relief (truss rod too loose), bad fret(s), or a warped "ski-jump" neck. I would check things out in that order.

If you tighten the truss rod, that will lower the action, and you must re-adjust the saddle height screws to a reasonable action height before checking for buzz and dead notes.
  #7  
Old 12-11-2011, 02:30 PM
Registered User
 
Join Date: Aug 2005
Location: Fort Collins, Colorado
Forgive me if I'm being Master Of The Obvious, but you should also make sure that your bridge saddles reflect the radius of the neck (meaning sufficiently higher on the A and D strings). Other than that, I agree with previous posters; tighten (flatten) the neck and raise the action, and see where that gets you.
__________________
THUS ENDETH THIS THREAD. <-- So sayeth Fretlessman71, a.k.a. "Thread Killer"

http://www.michaelolsononline.comCongratulations - you found the secret message!Colorado Club #6
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Follow TalkBass on Twitter   Visit TalkBass on Facebook  

All times are GMT -6. The time now is 02:14 AM.




Copyright 2011 Talk Music Group Inc. All rights reserved.
Play guitar? Visit our new sister site TalkGuitar.com [beta]
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.