Quote:
|
Random question: How many coats is standard on an epoxied bass board?
|
it all depends on how thick you applied them, and what your thickness target is. I apply three rather thin coats in my process - the first coat fills all the pores, the second coat builds thickness and is roughly leveled after it cures, and the third coat is for final leveling and polishing
because you have potential to harm the neck shaft finish, I would recommend using only lightly soapy water when wet sanding and never using naphtha, mineral spirits, or any other kind of petroleum product. using soapy water also eliminates the need for a respirator cartridge that will properly protect you from the fumes gassed off as the other products evaporate - using only soapy water means you can use a simple (and inexpensive!) dust filter in your respirator
all the best,
R
