Schaller TK 0881-001 gear orientation
I bought the Schaller TK 0881-001 tuners to finish a rehab project and they do not fit due to the widest end sticking out over the edge of the head at the very end. At the rounded end I have an 1/8" chunk of metal hanging over. This is a Fender Squire P-Bass. I was going to try and angle them but they fit to close together to turn them.
So my next idea was to take them apart and flip the deck so the gear faces out and not towards the neck. Is this a good idea? I can tell the gears are cut at an angle. From what I have seen almost all tuning keys face with the gear towards the neck and the turning key on the other side.
I could grind down the corner of the key but they cost more than the bass did. The idea was to rehab this one until I could afford something much nicer. My current tuning keys are so shot they flop when there are no strings attached.
Or do I just cry and put the old ones back on?
just send them back for ones that fit.
|All times are GMT -6. The time now is 12:35 PM.|
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.