Truss Rod Adjustment (Traben Array 5)

[SeanO34]

Hey Everyone, new to this, i've got a traben array 5 and I decided that i'd like to use a lighter gauge strings as to what was the factory strings. But getting a buzz on the Open B. So i need to asjust the truss rod, never done this before so was looking for some hints/tips, what to do/avoid etc. Any help is appreciated! thanks SeanO

[tabdog]

Which Array do you have? There are at least 4 Array
models and they have bolt on and set necks and at
least one has a 2 truss rod neck.

Inspect the neck for the amount of relief you prefer.
That is what determines if the truss rod/rods need to
be adjusted. (Not a buzz)

The buzz on the open B string would indicate that
the lighter string is loose enough to cause that.

Put some super glue in the nut groove until it rises
enough to stop the buzz.

Tabdog

[SeanO34]

Hey, thanks for reply, and upon further inspection I found that I didn't need to adjust the truss rod, (thank god). Also that it's a dual truss rod (which is good to know for future reference)

It's this model here but a 5

http://www.trabenbass.com/array.php

Managed to reduce the buzz through raising action and with minimal effort really, it's not completely gone but I reckon your last wee trick should be the final push needed to get rid of the buzz