Advice on setup
Hi again everyone , im considering a wired IEM setup and wondered if im on the right pat. Id like the ability to control 2 guitar players and singer separately along with my bass signal. I was looking at the rockon audio tasty blender since it has a limiter built in, i was hoping to use a splitter at the snake similar to one of these
To catch each signal before it goes to the main mixer. I guess im a little worried it may rob too much signal? Or will this setup work. Just fyi im getting fitted next week for my ears at the audiologist. Thanks for any advice
Might work, might not!
In a perfect setting, you can do this. In most real world settings, this can lead to hums in your IEM's, the PA, etc due to not sharing a common ground, or by being on opposite electrical phases.
What you need to use is a transformerized mic/line splitter for each microphone or line level source you are splitting between your IEm mixer and the house mixer. Something like a Rapco MS-4, or an ART S8 which is an eight channel mic splitter in the same price range. The Rapco likely has higher quality transformers and it is made in the US.
Each input channel has a ground lift switch (to cure the hums you are creating by tying devices together from different AC circuits or phases or due to nasty electricity. The Art has mic/line pad per channel as well. Actually not a bad piece.
You might get your "budget" splitters to work in a rehearsal environment, but it is at gigs where you will have the most issues. Basically, hear me now or thank me later. But using straight splits will lead to grief at some point. Take that $60 and save it on up for the solution not the band-aid.
Particularly if you are dropping custom mold cash, spend the money on something of this nature and make it worth having spent the extra dollars on a workable splitter. Good luck!
thanks you so much for the reply, ill look into that route. I would like this to work well , for the long haul with wires. I thought of wireless, but anything ive ever used that was wireless gave me issues so i tend to avoid wireless things (even cell phones lol) just making sense of all the options is the hard part.
if you are looking for wired. you can get the shure PSM200 as a hardwired system for approx $200 less than the wireless version.
you can get the wireless PSM200's used for around $250. I can't magine how cumbersome a wired in-ear would be on stage. YMMV
|All times are GMT -6. The time now is 04:02 PM.|
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.