|  | | 
05-17-2008, 10:26 AM
| | | | OUCH!!!!
Sign in to disble this ad
so i play for my church every sunday (go back and forth from bass and electric). last week during practice... i had been feeling static on my lips whenever i would walk up to the mic. then finally one of the times i went to sing... BAM!!! i thought i got hit in the head with a baseball bat. i sat down for a minute and quickly realized that i was just electrocuted.  dang that hurt. my mouth was bleeding and everything. everyone in the band blamed it on my lip ring (they just dont like it i think)... but i dont think that was the case personally... i mean it couldnt have helped the situation. i was playing electric at the time and was also wired with an aviom so there was plenty of power wrapped around my body. my question is this... since they insist on me using a wired mic because i dont move around a ton, how do i prevent it from shocking me again? that sunday i touched the mic with my hand and got electrocuted again through both arms. someone told me that either the electric or the mic wasnt grounded properly... could that be? how do i fix it?  | 
05-17-2008, 03:49 PM
| | Registered User | | Join Date: Jan 2004 Location: montana | | Must be Gods way of telling you to get rid of the lip ring.  Something is not grounded properly, probably your bass amp if no one else is getting shocked. | 
05-17-2008, 06:17 PM
| | Registered User | | Join Date: Dec 2007 Location: NJ/NYC | | Quote:
Originally Posted by ajklnr .. there was plenty of power wrapped around my body. | With great power, comes great responsibility.  
__________________
Christian Praise & Worship Bassist Club Member #142
Zon Club Member #3
| 
05-17-2008, 09:39 PM
|  | Registered User Endorsing Artist: Aguilar Amp and Mono Cases | | Join Date: Oct 2005 Location: San Diego | | Quote:
Originally Posted by derelicte With great power, comes great responsibility.   |  | 
05-18-2008, 02:14 AM
| | Registered User | | Join Date: Apr 2007 Location: Finland (Northern Europe) | | | Hi.
If You're all still alive, no joke there BTW, I'd suggest that an electrician should check all the outlets. If the problem isn't there in the church wiring and even if it was, Your amp should be inspected also, if there's any doubt that the grounding is faulty.
Grounding the strings to reduce hum can kill You, that's the reason I leave that as a last resort.
I take from Your experience that You live in an 110V environment. Be thankful for that, a jolt 230V through You wouldn't feel so pleasant.
Regards.
Sam | 
05-18-2008, 06:13 AM
| | | | Lip ring will make it worse, but only if there's a serious problem in the first place.
people die from this stuff! If the church (of all people!) won't take the problem seriously call the local health and safety people - they can close the place down if its a danger to public (ie your!) health.
You can get cheap safety testers that check that the mains plugs are correctly wired. Often they include an RCB which will shut down the power in the even of a problem - definatly a good investment if your not happy with the power.
Ian | 
05-31-2008, 05:31 PM
| | Registered User | | Join Date: Apr 2008 Location: Manchester, UK | | | get the electrics tested. this can be lethal. | 
05-31-2008, 07:20 PM
| | | | I also play in my church and had this very same problem- altough I've never had it shock me bad enough to hurt...just tingle. I was playing an electric guitar ran through a Line 6 floor pod then into this very old (huge) amp that I got from my school who was going to throw it away. It's from like the 60's (called the "Baldwin Exterminator") and it has no ground. Sure enough that was the problem! I tried using my friend's Fender twin reverb that was grounded and the problem was gone. I've had it happen at more than one venue actually, so now if I ever play through the amp while singing, I'll use a wireless mic. | 
06-02-2008, 10:34 PM
| | Registered User | | Join Date: Dec 2002 Location: Prince Edward Island | | | Body jewelry, unless REALLY cheap, is non-magnetic as well as non-conductive. You have a grounding problem.
__________________ G&L Bass Club member #152 - Eden Electronics Club member #162 - Yorkville/Traynor club #105 | 
06-03-2008, 02:18 AM
| | Registered User | | Join Date: Apr 2008 Location: Manchester, UK | | | non-conductive? Quote:
Originally Posted by Todd Stanley Body jewelry, unless REALLY cheap, is non-magnetic as well as non-conductive. You have a grounding problem. | if it's made of metal, it'll conduct... | 
06-03-2008, 04:59 AM
| | Registered User | | Join Date: Feb 2007 Location: Finland | | | Yes all metals conduct electricity.
I've experienced electricity in the mic grill as well a couple of times, not a strong current as the OP was experiencing, but still so you could feel it in your lips. I guess it was a grounding problem, but I never cared to solve it...
__________________
♪♫♪♫♪♫♫♪♫♪♫...
Finnish Bassists Club member #5 - Flatwound Club member #110 - Bacon Club member #24 - Lefty Playing Righty #21
| 
06-04-2008, 03:45 PM
| | Registered User | | Join Date: Apr 2006 Location: Las Vegas, NV. | | | I've run into this on some gigs where there is funky wiring. Since you can't do much about it on gig night, I keep a foam windscreen for my mike in my gigbag. It keeps me from getting zapped by preventing my lips from touching the mike screen.
Since you're in church you need them to get to remedy the problem for everyone's sake. | 
06-04-2008, 03:55 PM
| | Registered User Endorsing Artist: Barker Basses | | Join Date: Apr 2007 Location: Buffalo NY | | | If your amp is grounded, lift it
or
if it is lifted, ground it.
or
do likewise with the FOH
Lip ring will definitely make this worse. That will be a potential hazard as long as you have it. Not to mention a risk of infection. The human mouth is a constant portal for potential infection of all kinds. I'm hip to the fashion statement, just not a smart or practical one, especially for musicians (ironically).
JKT | 
06-29-2008, 05:01 AM
| | Registered User | | Join Date: Nov 2003 Location: Indianapolis, IN | | | NEVER lift the ground of an amp or a piece of PA gear.
If your amp has no ground, and/or has a ground switch (like the old Fenders), have the ground switch disabled and have the power cord replaced with a grounded one. (The ground switch on current Fenders is there just for the vintage look - it's not connected to anything.)
Plug your amp into different wall outlets until you find one that has its ground at the same potential as the PA (= no more ZAP). To test: grab the strings in one hand, and touch the mic with the back of your other hand. (The back of your hand is more sensitive, and a shock cannot cause you to involuntarily grab the mic.)
And of course it is possible that there is a faulty outlet.
__________________
http://www.padrick.net/TP_Audio.htm
| 
07-07-2008, 09:05 PM
|  | Deteriorating faster than I can lower my standards | | Join Date: Jan 2006 Location: Frederick MD USA | | Quote:
Originally Posted by JKT Lip ring will definitely make this worse. That will be a potential hazard as long as you have it.... I'm hip to the fashion statement, just not a smart or practical one, especially for musicians (ironically). | Too bad the lip ring didn't get welded to the mike's windscreen. That would've been hilarious!
OK, maybe not for you... 
__________________
They stole my mood ring! Not sure how I feel about that...
Herding noodlemeisters since 1971 | 
07-08-2008, 07:23 AM
| | Registered User | | Join Date: Aug 2007 Location: Boston, MA | | | I stopped having this problem once I started making sure the whole band is plugged into the same circuit. | 
07-08-2008, 09:12 AM
|  | Total Hyper-Elite Member | | Join Date: May 2000 Location: Groom Lake, NV | | | First, you were shocked, not electrocuted. Electrocution is death by electric shock. Second, it wasn't static electricity that shocked you. Third, you have an improperly grounded system. This can happen when the PA is plugged into a different circuit than your amp. It's very common when the power outlet is not properly gounded and you become the path to ground. Don't play in this situation until the circuits are checked out by a professional electrician. You could die. Finally, the lip ring won't make a difference if the grounding is hunky-dory.
__________________ Remove all zig for great justice. | 
07-08-2008, 10:53 AM
| | | | ONe other possibility is a problem in a mic that has phantom power sent to it.
48v phantom power will certainly raise your eyebrows a bit.
I only mention it since you aren't dead, lucky for you about the 110v system, over here you'd at the list have a burnt lip....
__________________
Roscoe Century Standard V, Focusrite Compounder
Markbass SA450, Bergantino AE410
| 
07-08-2008, 03:13 PM
|  | Registered User | | Join Date: Jun 2006 Location: Seattle | | | Question for the responders, esp the electrically inclined:
the consensus seems to be that this situation (shock from the mic) is potentially lethal. My frontman/guitarist has this problem often, due we believe to a multi FX korg pedal that was purchased in japan, and so has Japanese style power cuircuits, which he must run thru an adapter here in the states. It also causes noise issues often.
we all have figured it was an annoyance, but if this is potentially lethal, we better find a safe and sure solution.
What is the safest method of adapting his pedal to USA power circuits? | 
07-08-2008, 03:38 PM
|  | Registered User Web Wookiee for several folks | | Join Date: May 2007 Location: Saint Louis, MO | | | Is the plugin for your amp a two prong?...flip it over and see what happens. My old Kustom used to shock me from time to time...flipped it over and it's fine.
__________________ P-Bass #00 / Ampeg #191 / Relic #36 / Nash Owner #12 | | Thread Tools | Search this Thread | | | |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is Off | | | |