| FS AMT S25B
This is the s25B NOT the "Super Preamp" $350 shipped...
FROM THE AMT WEBSITE:
The S25B is an electret-condenser microphone that has been designed for acoustic bass. All of the parameters that are problematic for the double bass have been addressed. To be able to get the most gain before feedback it uses a very tight pattern to give a high rejection to surrounding noise, at the same time reproducing accurately the subtleties of the bass. As placement is especially important with an instrument that has a fine finish and varying dimensions, this microphone's attachment mechanism is designed to secure the mic to the bass in different positions taking seconds to attach. This mechanism is fitted with natural soft suede so as not to mark or mar instrument.
Made from aluminum to keep the mass low yet extremely strong, this microphone will remain durable through many years of use. The flex arm is easy to position yet retains it's placement throughout the most active of performances. The mic has an LED that can be easily seen while performing. This indicates status of a battery or phantom power.
The pre-amp for the microphone is rugged anodized aviation aluminum, which houses the electronics that can be placed on the floor. The pre-amp runs off of battery or phantom power. The output is terminated with a male XLR type connector for balanced use. The mic is connected to the pre-amp by a four pin locking connector.
Specifications:
Element Condenser
Polar Pattern Cardroid
Frequency 30Hz - 10kHz
Sensitivity -65dB+ 4dB
Impedance 150 Ohms*
Phantom Power 12 to 52 vDC*
Self-powered battery
Max input SPL 120 dB
Dimension 10" Flex Arm
Mechanism Opens min 5" to appox. max 9 & 7/8"
Weight Mic only: 71 grams
Comes with:
AMT S25B Microphone
Floor Preamp with XLR output.
Hard shell Blo-mold protective case.
Sign in to disble this ad
| 
