Vektor pickup --- $80

Nathan Levine · #1 04-15-2011, 10:08 PM

Requires install in bridge foot. Not convinced it is working like it should. Comes with a brand new 48v to 9v adaptor straight from Germany.

Basically priced to recover cost of adaptor. Anyone want to fiddle with this?

**Francois Blais** · #2 04-16-2011, 05:48 PM

This?
Doesn't seem to require drilling.

Maybe you have an earlier, discontinued model?

Nathan Levine · #3 04-16-2011, 10:30 PM

It is indeed the older model.

Nathan Levine · #4 04-17-2011, 03:32 PM

I'll try to get a picture up tonight. When i took it off i snipped the cable right at the connection so It will have to re-soldered. No info that I can link to, but there is a pretty extensive Vektor thread that could be purused for info on mounting and such.

Nathan Levine · #5 04-17-2011, 03:33 PM

Pm me with any possible trade items...

Nathan Levine · #6 04-19-2011, 11:11 AM

Sorry I have gotten behind on this. Will try to post pictures tonight. I should be able to get to it.

I am not really in need of much right now. A Focus SA (or comparable power amp) or a wizzy cab (or comparable cab) are next on my list of potential items to acquire. Obviously there would be money on my side for these types of items.

An interesting mic or preamp might work too.

tiki613 · #7 04-20-2011, 12:48 PM

I'm interesed, i play on EA doubler this is good for phantom power?

Nathan Levine · #8 04-20-2011, 01:06 PM

It requires 9v of power but with the 48v to 9v adaptor, anything that puts out phantom should work.

Need to post pictures and just not being able to get to it. Will try again tonight. My bass is headed to the shop for the evening so I should be able to get to it....

Again, for the record, I am not convinced that it is working right. Hooking it up to see will require a bit of soldering on your part. It doesn't come with the required drill bits so you will need to be handy with a drill. It is a pretty precise install.

I gave up on it and decided to go with a DPA 4099b.