Line 6Rich and Aaron would like to welcome you to the Line 6 TalkBass Forum! This forum is a great opportunity to talk about what you have liked from Line 6 in the past, and more importantly, what direction you’d like to see Line 6 take with our future products for bassists.
Every time i change the settings of "User 2" that becomes the setting for every "User 2". For example, if i change the "User 2" on patch 21, "user 2" will have the same setting no matter what patch i go to.
can anybody shed some light on this for me?
btw, its very hard to search for X3 content b/c its only two letters
Every time i change the settings of "User 2" that becomes the setting for every "User 2". For example, if i change the "User 2" on patch 21, "user 2" will have the same setting no matter what patch i go to.
can anybody shed some light on this for me?
btw, its very hard to search for X3 content b/c its only two letters
I am checking this out. I will let you know.
__________________
Rich Renken
Customer Advocate, Line 6
Tell him to unlock Tone 2 (on the main homescreen he should see an icon that looks like a lock with the #2 next to it, turning the knob below that icon should result in a what looks like an open lock).
__________________
Rich Renken
Customer Advocate, Line 6
I'm confused. What bass amp/cab modelling does the X3 use? The Lowdown modelling or the Bass Pod XT Pro/Live modelling?
There are 28 bass amp models and 22 bass cabinet models to choose from. It's a hoot. I used the dual mode which I send to separate Atomic Reactor amps and then mike them both up via the PA - one with the Line 6 Frankenstein amp model through a Marshall Major 4 x 15" cab and the other SWR SM-500 model through a 1x18 + 12 Coliseum cab. It shakes the foundations.
Line6 X3 Live Question 
