Relay G50 power supply

popgadget · #1 08-11-2010, 03:57 PM

Can the Relay 50 be powered through other 9V ctr negative pedals?
If so, should the relay pwr supply be used to power the chain?
I am only using a tuner and the relay, so there isn't much power consumption. The tuner would be either a Boss TU2 or a Korg Pitchblack.

popgadget · #2 08-15-2010, 06:48 AM

So....
I connected the Relay's power supply to my Korg Pitchblack tuner, and a jumper to the Relay's receiver. Strangley, I got no output out of the main output, but I did get signal to the tuner. I wonder what would cause that behavior. At any rate, I guess the answer to my own question was, No, you cant share the power supply.

thebasssponge · #3 08-20-2010, 09:50 AM

I power my G30 from my Boss TU3 tuner using a Boss PCS-20A PARALLEL DC CORD - Power Supply to tuner and the parallel cord to G30 reciever and Boss ME50B

no issues

hope this helps

LowDown Hal · #4 08-20-2010, 09:54 AM

The Line6 web site says both receivers use the same power supply.

When I looked at them both at my local store the other day the G30 came with a 200mA supply. The G50 came with a 300mA supply.

What I didn't do was turn the receiver's over to see if they had power requirements written on the units themselves.