Fortress Rockbass bridge setup
I recently purchased a used Fortress rockbass in fantastic condition with the 3D bridge. I love everything about the bass but the g string action is higher than I like but it seems that it is as low as I can get it. The floating bridge and saddle are bottomed out but it is still too high, but not unplayable. The just a nut is set up at.01 like the manual says, so it's good there. Short of shimming the neck, any suggestions? Like I said not unplayable but still quite noticeable.
Nevermind, saw a video last night that showed a guy filing the top of a saddle down then filing the notch deeper, so that's what I'll do.
Let us know how this technique works out!
You can check out Warwick's youtube page for instructional videos on setups for more help!
I measured how much I need to get it down and it turns out to be about 1/16. I'm gonna take it off the bottom instead and it'll work out so that I won't have to file the notch.
|All times are GMT -6. The time now is 08:04 PM.|
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.