Bridge Shims

[ctxbass]

Are there disadvantages to wood (properly fitted) added under the bridge feet to raise the bridge? Is it preferable to use shims under the adjuster wheels if I can gain enough height and maintain stability? I am changing a bass to a gut setup and as is, the adjusters wont be stable with the needed height increase.

[jmpiwonka]

read post #6.

Bridges and Aging ?

[ctxbass]

That post prompted me to start this thread.

I would like to know if there are any disadvantages to adding wood under the bridge feet.

[Silversorcerer]

If one can splice a piece of metal (adjuster) into the bridge leg with little noticeable effect, there is probably less effect splicing a piece of wood into the foot, if the wood is similar species and grain orientation. I don't know from experience, but it seems reasonable.

[ctxbass]

Thanks for the replies.

1/4" should be substantial. Leaving the wood bushings unglued is a great idea since it would facilitate switching back to steel strings.

I have seen my luthier add wood to the feet and his work is meticulous so the fit is not a problem, but it is not easily undone.

[robobass]

I like this advice. Why refit the bridge feet when you don't have to?
Robobass

[warenut]

Funny that this should come up. I just had my bridge re-set, and that plus temp changes have necessitated my raising the adjusters to an alarming height (3/4"?) The boys at the shop said no more, put some shims in.

[ctxbass]

Maybe this is a case for adding wood under the feet.