My nut(s) are too small!
So I'm pretty sure the nut at the top of my strings is too short. In order to prevent my strings from buzzing up there, I have to raise my bridge to a nearly unplayable height up in thumb position. Right now I have a paperclip pushed against it to temporarily raise the strings and prevent buzzing, but I would like a more permanent solution.
My goal is to make a nut that is taller to raise the strings in the lower positions, but I am unsure the best wood to use. Or should I be awesome and make it out of bone? That would be pretty sweet...
Alternatively it would be cool to find a luthier in the Ann Arbor area to check out my bass and make a nut for less than the cost of my arm.
Pretty sure the nut isn't your problem.
You finger after it, and you would only need to raise it if your open strings are buzzing. I suggest adding relief to your neck.
What's going on here?
This is the DB section, no?
DBs don't buzz?
Something is off here. I'm obviously in the wrong section, sorry for the pointless comment.
My strings buzz when I play them open and even sometimes when I finger the lower positions. (1/2 -2)
So would this involve re-plaining my fingerboard?
The traditional wood for a DB nut is obviously ebony, and nut blanks of low to medium grade ebony are rather cheap. ~10€.
In a BSO any hard material will do, mine is birch ATM.
In a DB (/fretless in general) the nut slots can be very low without causing too much problems, a fingered note is the eqvivalent of the nut slot being level with the FB anyway.
Awesome! thanks guys :)
There are differing opinions on how high the nut has to be. I think 0.010" clearance is plenty and if it isn't then there's something wrong with the board, but there are plenty out there who insist that it should be more like 30-40 thou.
You could put a paper or veneer shim under the string nut to raise it up that would be the least intrusive method possibly
I find set up issues are best left to a qualified luthier who has the experience, skills and tools.
Hope this helps,
|All times are GMT -6. The time now is 01:33 PM.|
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.