Getting into the "speaker box" game...
Over the last couple of years I've been intrigued by the DIY speaker building community, and I've noticed there's really no one out there building exceptionally nice cabinets for proven designs, and certainly NOTHING like what I've come up with.
While it's possible there may come a day when I choose to sell my own branded, fully assembled speaker model, for now I think I've found a simple way to "cut my teeth" in the speaker business.
At minimum, I'll end up with a really kick-ass home theater setup.
The plan is to build a cabinet for this:
That looks like a cross between this:
...and a vintage Marshall plexi-style amp:
I got the kit in from Erich H at diysoundgroup.com a few weeks back.
As expected, it was meticulously packed.
There were even peanuts in the crossover parts box:
Another slow & steady project...with progress pics.
The box takes shape as the sides and tops cut:
Edge round over:
Most of the many DIY cab builders on Talkbass hang out in the Amps Forum. I guess a home theater cab might be a bit of a loose fit there though. ;)
Best of luck with your build. I'll be particularly interested to see where and how the Marshall tie-in comes into play.
Yeah...I didn't want to post in the wrong sub-forum.
Miscellaneous seemed like the safest bet.
The current focus for this project is home theater and possibly studio monitor/small PA use.
Because of the aesthetics, I'm guessing these will really appeal to musicians.
Since these use pro-audio drivers with a well-designed crossover, they get loud and stay clean.
That said, this cabinet doesn't go very low, so a sub is really recommended for most uses.
Have you checked out Bill Fitzmaurice designs yet? His are the best in the business and his HT subs are monsters!
The curves for that design look great, and the parts aren't too expensive. I've been thinking of going DIY for some speakers to install in my preamp factory (aka basement laundry and furnace room). For that use, a high quality monaural system would probably sound better than lower quality stereo for the same overall cost.
With those sweet dovetails, it'd be a shame to put anything but a clear finish on it.
In fact, Bill is an active participant on one of the forums where these designs were developed.
I have a great deal of respect for his perspective on speaker cabinet design and bracing.
However, these represent a DIY segment that is growing exponentially right now.
There has been a lot of interest in controlled directivity, horn-loaded designs that use high-quality polyimide compression drivers that offer PA-level sensitivity combined with dome-tweeter smoothness.
The designs being produced are pretty spectacular from a performance perspective, and are begging for an equally compelling cabinet.
The Fusion-8 Alchemy was designed by Jeff Bagby, the creator of Passive Crossover Designer and other speaker design software, and a highly respected designer in his own right.
Still, hide glue and tolex with string and piping is the go-to for this style box, so it will be the baseline.
I work with a local painter who does guitars and custom cycles, so bursts, flakes and flames are all within the realm of possibilities.
|All times are GMT -6. The time now is 09:15 AM.|
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.