Bought these speakers.
http://cgi.ebay.com/ws/eBayISAPI.dll...MEWN:IT&ih=003
The description says "pretty much brand new." You can't tell from the pictures-they are not a matched set. They have different horns (the plastic part.) One of the horns was cracked all the way through. When I removed the screws it became 2 pieces. It wasn't done in shipping. In addition to that, I kept hearing a bumping noise whenever I moved the cabinet. When I removed the horn I discovered the driver was held by 2 flathead machine screws that were too long, allowing the driver to flop. Terrible. The seller is supposed to send replacements this week.
Now, the review. I hooked these up to a power amp, played music though an iPOD and a mic preamp. It sounded terrible. Overpowering harsh highs and not much low at all. I tried all the iPOD EQ settings. Nothing sounded good. I tried using a mixer and EQ with better results, but I had to take most of the high end out.
I wasn't expecting club filling, gut busting bass, but these speakers just don't cut it. Any speaker worth it's salt should sound decent with a flat eq. Not these. The only redeeming quality is they are made out of birch plywood and not super heavy.
Now a couple of questions. They are rated at 350 watts. I was using 200 watts per speaker. Could I have underpowered them? Would a different crossover help?