3Leaf Audio Club - Page 42

Spencer! · #**821** 11-12-2012, 01:34 PM

Quote:

Originally Posted by M Sterling

Here ya go!

New Pedal Demo Video! 3 Leaf, SS/BS, Iron Ether content

Awesome sounds! Very similar to my current pedalboard.

M Sterling · #**822** 11-12-2012, 01:39 PM

Quote:

Originally Posted by Spencer!

Awesome sounds! Very similar to my current pedalboard.

Thanks! The Wonderlove is RAD!!!

I usually have a compressor on the small board, but I wanted to do the demo as raw as possible. Lot's of versatility in those few pedals!!!

Down_Low · #**823** 11-13-2012, 02:23 AM

Hey Spencer, I saw on Facebook you mentioned that an Octave pedal would be "Definitely happening in the future!". Any chance this could be in the next few months, or is it more a long term plan?

Spencer! · #**824** 11-13-2012, 07:13 AM

Definitely not in the next few months - there's some other new stuff that's going to be happening in that timeframe though. I'd like to get to the octave sometime next year. I have a few ideas but I haven't had the chance to sit down and prototype them.

cybersnyder · #**825** 11-13-2012, 08:04 AM

Octave??????

That will be a must buy for me.

jwr · #**826** 11-13-2012, 08:14 AM

Want a Wonderlove soooooooooooo bad now!!!!!!!! If you're doing an octave pedal, I'm definitely interested too. All the octave pedals I've tried tracked like crap.

CTC564 · #**827** 11-13-2012, 08:16 AM

I haven't been able to find an octave pedal that I'm totally thrilled with...I will be REALLY interested in that

Hollow Man · #**828** 11-13-2012, 12:30 PM

Quote:

Originally Posted by cybersnyder

Octave??????

That will be a must buy for me.

+1 100%

enjoi1018 · #**829** 11-13-2012, 12:45 PM

Quote:

Originally Posted by Spencer!

Definitely not in the next few months - there's some other new stuff that's going to be happening in that timeframe though. I'd like to get to the octave sometime next year. I have a few ideas but I haven't had the chance to sit down and prototype them.

Any hints at the "other new stuff"?

You know we wanna know

JFOC · #**830** 11-13-2012, 01:11 PM

sounds like the future is a little fuzzy*

*Total conjecture

bludog · #**831** 11-13-2012, 01:57 PM

Spencer... this is your chance to grow your FB following. Tell everyone if they want teasers, they're going to have to hear about it through your facebook page. I mean, I saw you posted about the octave over a month ago, we even talked about it at Main Drag Music.

And there is also the synth you teased in one of your old filter demos. With a comp, octave, dirt and synth in the loop of the WL, there could be a lot more '3leaf/darkglass only' pedalboards on the PYPB threads. Just saying...

Spencer! · #**832** 11-13-2012, 02:44 PM

Quote:

Originally Posted by JFOC

sounds like the future is a little fuzzy*

*Total conjecture

You'll have to ask Darkglass about that!

bassgod0dmw · #**833** 11-17-2012, 02:25 PM

I'm sure it's been answered, so I'm sorry.

Does the Blend knob interact with the FX loop on the Wonderlove? I was just messing around with mine and stuck a Musket in the loop. When I engaged it with the WL on, it was a lot quieter and less fuzzy than I expected it to be. Same story when I had the WL off...

Spencer! · #**834** 11-17-2012, 02:29 PM

Quote:

Originally Posted by bassgod0dmw

I'm sure it's been answered, so I'm sorry.

Does the Blend knob interact with the FX loop on the Wonderlove? I was just messing around with mine and stuck a Musket in the loop. When I engaged it with the WL on, it was a lot quieter and less fuzzy than I expected it to be. Same story when I had the WL off...

The effects loop runs through a buffer, so some fuzz circuits will sound different than they would if you plugged them straight into your bass.

enjoi1018 · #**835** 11-17-2012, 02:40 PM

Quote:

Originally Posted by bassgod0dmw

I'm sure it's been answered, so I'm sorry.

Does the Blend knob interact with the FX loop on the Wonderlove? I was just messing around with mine and stuck a Musket in the loop. When I engaged it with the WL on, it was a lot quieter and less fuzzy than I expected it to be. Same story when I had the WL off...

Where was your blend knob set at? I figured out recently that the blend effects the entire loop (only when the filter is on), which can be good or bad depending on what your doing.

Currently, I'm really enjoying it. It basically lets you run a crazy line of effects in the loop with the filter, but having it ALL clean blended with your original signal.

bassgod0dmw · #**836** 11-17-2012, 02:42 PM

Quote:

Originally Posted by Spencer!

The effects loop runs through a buffer, so some fuzz circuits will sound different than they would if you plugged them straight into your bass.

Would you recommend to try a different pedal in the loop?

My goal is to get somewhat synthy sounds with both engaged, but also have the pedal in the loop to be just as useful as it would be outside of the loop. As it is now, it's pretty weak.

Spencer! · #**837** 11-17-2012, 03:18 PM

Quote:

Originally Posted by bassgod0dmw

Would you recommend to try a different pedal in the loop?

My goal is to get somewhat synthy sounds with both engaged, but also have the pedal in the loop to be just as useful as it would be outside of the loop. As it is now, it's pretty weak.

Try it in and out of the loop and do whatever works best. I use a TAFM in the loop and it works fine. Some fuzz circuits sound weird after buffers.

Jeff Moote · #**838** 11-17-2012, 03:24 PM

TAFM is a good one. Newer ones have a (defeatable) buffer built in so they sound more consistent with different instruments and signal chains.

j0616bass · #**839** 11-18-2012, 11:38 AM

I've been thinking about checking out the TAFM. My GGG muff clone isn't working for me. I know there are a ton of threads on the topic, but what do 3 Leaf owners prefer? Is the TAFM as versatile as advertised?

M Sterling · #**840** 11-19-2012, 07:40 AM

Quote:

Originally Posted by j0616bass

I've been thinking about checking out the TAFM. My GGG muff clone isn't working for me. I know there are a ton of threads on the topic, but what do 3 Leaf owners prefer? Is the TAFM as versatile as advertised?

As far as use with the wonderlove goes, its a toss up for which fuzz I prefer between the IE Oxide and the TAFM. With the pickle pie b coming in a close 3rd. I really like the way the oxide can get a really gated splatty tone or a really mean octave up grind. The TAFM is sounds a little fatter, but it cant get quite as focused of a pulse wave as the oxide.

Get both for sure.