Is the Behringer FCB1010 midi pedal board plug and play with the Bass V-amp pro?

[phatbassplayer]

Is the Behringer FCB1010 midi pedal board plug and play with the Bass V-amp pro?

I'm hoping it is..

I know with non-behringer devicces, that the unit much be programed..

Anyone have the skinny on this, I would greatly appreciate the info..

[CharlieC]

Originally Posted by phatbassplayer

Is the Behringer FCB1010 midi pedal board plug and play with the Bass V-amp pro?

I'm hoping it is..

I know with non-behringer devicces, that the unit much be programed..

Anyone have the skinny on this, I would greatly appreciate the info..

Although the FCB1010 may be the best controller for the Bass V-AMP Pro, it's not completely plug and play. One must do a little configuring to get it to do what you really want it to do.

Come and hang out on our Bass V-AMP Pro thread should you want more info quickly.

http://www.talkbass.com/forum/f15/be...amp-pro-687422

Cheers!

[glennq]

Hi from the newb,
I am seeking advice on some very basic midi wiring for my not so basic synthbass rig.

My goal is to be able to use the editors for all three modules simultaneously...

I will post detailed pics/specs of this setup soon, but here is the basic midi chain now:

FCB1010 Controller (OUT)>>>(IN)BEHINGER V-AMPBASS (OUT/THRU)>>>(IN)AXON-AX100 (THRU)>>>IN)TASCAM MKII122 (OUT) >>> BACK TO FCB1010 MIDI IN

I need to maintain a loop for the editors, but i have huge differences when switching between the AXON midi out and midi thru (2 separate jacks), the V-AMP program numbers are then all whacked out...

I have tried different arrangements in the chain, but the end result is all but one of the modules responding to PG changes or editors.

I am sure there is a good solution, and sorry if this is not the right forum, I just figured out my login after way too long.

Here's an overview of the rig:

The bass is thru-neck mid-grade Korean made, Hishot A, with Graphtech peizo saddles, Graphtech Midi interface, Graphtech Bass Preamp, Bartolini passive Jazz magnetic pickups, Mid/dark switch, Bass1/Bass2/Both switch, Synth/Basses/Both switch, MIDI Program up/down rocker switch, Passive Vol/Vol/Tone knobs for Bartolinis, MIDI Out, Stereo Basses out

All above gear is integrated with rack-mounted Mac Mini running Mainstage & Logic live, USB MIDI/AUDIO Interface, 12 Channel Mackie Mixer:All controlled with rack-mounted floating 24 inch Elo Touch Screen. Dig it.

Carver PM 300 (high end)
Carver PM 2.0t (low end

EV 15/Horn
Ampeg 2 X 10/horn

Thanks again for any help,
Glenn