| Behringer V Amp Pro preamp bypass mode
"To bypass the pre-amp section and remove all tonal coloring imparted by it, press the [TUNER] + [TAP] buttons simultaneously. This state could be considered the 33rd available AMP model and the one most truthful to the signal you are feeding the V-AMP. Pressing the same keys again will bring back the pre-amp section".
Hi, hope all is well.
I know this may have been mentioned before but im having trouble turning it off on my V amp pro. Im set to L3 and using the effects as normal. Then pressed the TUNER and TAP simultaneously and let go. The effect was still on. I had to turn the effect knob down. Am I doing this right? Looking for that piece of mind that cab sim AND effects can be turned off.
Hope you can help.
Jason | 
