|KayBass ||01-18-2014 12:36 PM |
Boss RC-2 noise issue
I just started using my Boss RC-2 for use on some duo gigs I have coming up in the next couple of months. The problem is, the more layers I add, the more 'feedback' I get. The first layer is only a faint hiss, but by the third, it gets to the point that I worry about damaging my cab and/or amp..
The signal goes active Schecter --> Boss RC-2 --> GK 700RB II -->Ampeg 610 Hlf
|KayBass ||01-20-2014 11:40 AM |
|GregBEL ||01-20-2014 11:47 AM |
Odd... I've been using a RC-2 for a couple of years now and I've never had any such problems. I do have it in the very back of my signal chain to avoid any unwanted effects, but so do you. Have you tried testing with some of the volume on your bass dialled back? Just to check...
|KayBass ||01-20-2014 12:01 PM |
I have, and it doesn't affect it.. That's why I'm wondering if there's an issue with the pedal.. I don't know if this makes a difference, but I only use the AUTO function...
|GregBEL ||01-20-2014 12:20 PM |
Hmm. I usually use the other mode, but I don't recall any problems in auto. How about the level of the loop: you have it set on max?
Mine's about midway for the loop to be more or less the same volume as my dry signal... but depends on your signal ofcourse.
|KayBass ||01-20-2014 12:23 PM |
It never goes beyond 12 o'clock.. I've had it as low as 9 o'clock and still had the problem..
|Mosfed ||01-20-2014 04:53 PM |
Mine have never done that - neither the 2 nor the 3. Something is up and I would get it checked out.
|KayBass ||01-21-2014 06:39 PM |
Thanks for the help everyone, I'll get it looked at asap
|All times are GMT -6. The time now is 11:42 PM. || |
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.