Is this doable?

[bass_man_dk]

I have this old line6 floorboard lying around and the resale value on these is not much as far as I can see. So I was thinking of gutting it and rewiring the pots and pedals as such:

the bottom row of 6 switches would each be an FX loop/bypass

the two upper switches 1-mute/tuner and the other would turn all the loops on

the volume pedal would need to be rewired but would still be a volume control

and the wah pedal I would like to use as an expresion pedal for a moag pedal of mine but I have no idea how to rewire that

what do you guys think other than drilling a few holes for send/returtns and some rewiring and doesn't seem that hard but maybe I missing something

Dan

[bass_man_dk]

[TOOL460002]

Unless you're great at that kind of thing I think you might not want to. Specifically, I would check out the specs on the thing you want to use as an exp pedal. Not every pedal can see some exp values. I know there is a difference between CV and whatever digital pedals like to see. My main concern would be a line6 exp out not feeding a CV in the thing it wants. I've got some weird exp things and some units wont see it, some use trs cables, and some are fine. I would check that out before you drill and solder.??

[Eric Scholz]

so basically you're just using the actual box, and replacing the guts... if you know how to do this you're fine, but the fact that you had to ask on a forum might mean you're in over your head. the only way to learn is to try though, so i say go for it.