|  | 
02-03-2010, 12:32 PM
| | Registered User | | Join Date: Dec 2007 Location: New Delhi, India | |  ehx bbm issue!
Sign in to disble this ad
so it wont work on batteries anymore!!   why??
it was working on battery a week back but now it wont. damn i hate this. it doesnt make sense to send it to USA anyway so i dont know what to do. powering it using a daisy chain adds buzz so i needed the battery option
__________________ Quote:
Originally Posted by JimmyM  if you want to make a million dollars in music, start with 2 million | LESSONS = GAS killers!
|
02-03-2010, 12:42 PM
| | | | If the battery clip is knackered due to too much handling with swapping and changing batteries, you should be able to see if a wire needs a quick re-soldering.
If not a visible fault, you could just replace the battery clip anyway.
My BBM powers fine of a Dunlop DC brick fine, which is really just a glorified daisy chain. No hums at all.
Maybe the two faults are linked ? |
02-03-2010, 12:44 PM
| | Registered User | | Join Date: Dec 2007 Location: New Delhi, India | | Quote:
Originally Posted by Wud If the battery clip is knackered due to too much handling with swapping and changing batteries, you should be able to see if a wire needs a quick re-soldering.
If not a visible fault, you could just replace the battery clip anyway.
My BBM powers fine of a Dunlop DC brick fine, which is really just a glorified daisy chain. No hums at all.
Maybe the two faults are linked ? | the clip and soldering looks very solid, i checkedalready. might replace it i dunno if i want to mess with it
__________________ Quote:
Originally Posted by JimmyM if you want to make a million dollars in music, start with 2 million | LESSONS = GAS killers!
|
02-03-2010, 05:24 PM
| | Registered User
endorsing artist: Dean guitars, Marshall , Rotosound strings | | Join Date: Sep 2005 Location: North Kent.UK | | | this happened to me a while back. there were no faults within the circuit that i could ascertain.
i now have two bbms one that stays on my big board, and one that goes out for smaller (gig bag) shows
__________________
Lefty Union member #50/Cliff Burton Fan club member #28/Effects Addict Club member #9/EHX PT2 #7 /CPWBB #69/I has Cream Pie #6/ MXR #11/Boss Rocks #20
|
02-04-2010, 05:18 AM
| | Registered User | | Join Date: Dec 2007 Location: New Delhi, India | | | am wondering if it might go bad if i try to re solder another battery clip
__________________ Quote:
Originally Posted by JimmyM if you want to make a million dollars in music, start with 2 million | LESSONS = GAS killers!
|
02-04-2010, 06:29 AM
|  | Jack Grundle and Chad Choad
Builder for FUZZROCIOUS PEDALS | | Join Date: Jul 2008 Location: Mount Laurel, NJ | | | Well, you are messing w/ the warranty when you modify the pedal.
So........either send it back for repair or buy a new one. |
02-04-2010, 09:11 AM
| | Registered User | | Join Date: Dec 2007 Location: New Delhi, India | | Quote:
Originally Posted by rratajski Well, you are messing w/ the warranty when you modify the pedal.
So........either send it back for repair or buy a new one. | cant send it back location location location
so messing with the warranty does'nt matter really
__________________ Quote:
Originally Posted by JimmyM if you want to make a million dollars in music, start with 2 million | LESSONS = GAS killers!
|
02-04-2010, 09:25 AM
| | Jack Grundle and Chad Choad
Builder for FUZZROCIOUS PEDALS | | Join Date: Jul 2008 Location: Mount Laurel, NJ | | | Welp, then unsolder the old battery clip and resolder a new clip to the power jack. If it doesn't work, you're no worse off than before...well, $4 poorer for the battery clip, but you can always desolder it and save it for future use!
Best of luck! Report back, please! |
02-04-2010, 01:31 PM
| | Registered User | | Join Date: Dec 2007 Location: New Delhi, India | | i will report back if i do that 
__________________ Quote:
Originally Posted by JimmyM if you want to make a million dollars in music, start with 2 million | LESSONS = GAS killers!
|
11-18-2010, 01:16 PM
| | Registered User | | Join Date: Oct 2009 Location: Wickham, UK | | I am having the same problem with my EHX Knockout. It works fine when running from a power supply but won't work from a battery at all 
__________________ Quote:
Originally Posted by behndy BruceBass is about 42 inches tall, nearly as wide. rippling muscle beating the hell out of a bass twice his size. FUNK GNOME | | | Thread Tools | Search this Thread | | | | 
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off | | | |
