First DIY pedal BYOC content
So a while back, I decided to try to build a pedal myself. Having no real experience with soldering on PCB's, I thought I should start out gently.
So up around xmas I bought myself a BYOC optical compressor and build it.
here's some pictures with some notes on them - hope this link works.
only real problem I had, was that the manual didn't say anything about how the LED should be oriented, and ofcourse I turned it upside down the first time. that ment no light, but pedal worked. so I had to disasemble the pedal again and turn the LED 180 degrees...
awesome job, how does it sound?
At home i actually just got a small guitar AMP for practising, so there is no way to know for sure. I can hear the compressor working though. Extreme settings almost works as slow gear. You know, hardly any attack and then a volume rise. At more moderate levels (around noon) it seems my d and g strings gets more low end. I did the bass modifications, which is 3 different resistors in the right places - all included in the kit
Really nice job. Great looking.
I built an BYOC OD2 about a year ago, and had a blast doing it. A lot of fun, and the OD2 sounds terrific. I've been looking at the site thinking of building another one...
The bass mods are all broken out in the instructions online - they tell you exactly what to replace. I did the MOSFET mods which I think sound better. I also found a mod in their forum that put the boost [u]before[u] the overdrive, so you can run the boost into it. Makes the overdrive sound even better. That's definitely worth checking out. If you have trouble finding it let me know, I've got the link for it around somewhere.
You know I did keep a diary with pencil notes on a print out of the board. Unfortunately, I tossed it about 2 months after I finished the project. I probably should have posted it on BYOC as a help. :rollno:
However, their instructions on the bass mods, MOSFET mods (if you want them, and they are worth doing) are clear in the documentation provided you read the whole thing through first. There's not one place where they're all listed out.
The instruction for putting the boost in front of the FAQ are on the board and are a sticky I think.
Sorry I couldn't be more help, but I'm happy to answer any questions if you have them. I also found the folks on the BYOC board to be fantastic. When I first built the OD2 part of it wasn't working. I posted a gut shot and details and they told me exactly what to do to test for the two or three things that could be causing it. Turned out to be a bad component, and if not for them I would have spent days trying to track down what I messed up on. Then BYOC had a replacement part with two spares out to me the same day!
|All times are GMT -6. The time now is 05:20 PM.|
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.