foxx fuzz wah?

[easternbull]

A few questions regarding the foxx wah. Have they been discontinued? Their own online store is out of stock and the same goes for every online dealer I've found.

Is there a significant loss of low end as in other wah's made for guitar?

Is ebay the only place you can find one?

[JamesHommersen]

As far as I'm aware of they are discontinued. Foxx did a small run of their pedals 2 years ago. I own a fuzz wah and there is no low end loss. ebay or google searches would be your best bet. I might be selling mine in the near future but I have to get it back from a friend, if you're interested

[easternbull]

Thanks for the info.

Does anyone know what circuit is used the fuzz effect in these and the Jen fuzz wah pedals?

Was maybe thinking of getting a 3leaf GR2 and Bajo Mos booster or fuzzbox. Might be more practical with a envelope filter instead of a wah.

[easternbull]

Bump.

Does anyone know what circuit is used for the fuzz effect in the Foxx and the Jen fuzz wah pedals?

[metalmariachi]

the Tone machine, the wah is the Wah volume.

two of the best ever. and they love bass.

MM

[easternbull]

Ahh of course.

fOXX Pedals

Thanks for the tip, maybe a tech 21VT and one of these and I'm set.

adding them to these pedals should get me what I'm after.

meistersinger analog chorus
3leaf audio GR2
EHX booster.

[easternbull]

YouTube - King Crimson - Asbury Park - 1974 Live

[easternbull]

Checked a few demos of the foxx tone machine and it just sounds a bit too over the top for me. If the EHX LPB nano boost doesn't cut it Im definetly getting a VT bass.

Rely happy with the overdrive I'm getting from my ashdown alltube LB30 head with my active bass but the passive needs some more growl at lower volumes.

[ratylird]

I just got ahold of one of these off ebay, but theres a problem

The wah won't work

Does anyone know anything about these and how to fix the problem?

Everything else works great, I didn't think it was possible for just one effect to break in a multi-effects unit

[JamesHommersen]

Most likely it's the conductor coil. Is there a little round yellow cap with copper wiring in it? The copper wire must have come disconnected from the circuit board. I had the same problem, fuzz worked/wah was broken. It shouldn't be that hard of a fix if you're effects savvy. Let us know what's going on

[ratylird]

I ended up sending the unit to Foxx to get fixed, recieved it today and still the wah and volume doesn't work! I'm so angry, I've ended up paying £90 something to get it fixed and it's still broke.

Does anyone know how to fix it and could you please send me instructions?