HHHEEELLLPPP seting up rig question
 

howdy folks,maybey someone could help,I found a six unit skb,deep for 15$(I know right!!)same pawn shop had a furman,lights bells,whistles,etc for 25$,so now I got a zoom,B2,a line 6 relay g50 wireless (not a rackmount unit),got the furman on top,and in the bottom I have an Ampeg svt3 pro,the zoom b2 and the wireless are velcroed onto the svt,(all plugs faceing twords the back of the skb),the question is HOW DO I WIRE ALL THIS STUFF TOGETHER WITHOUT WIRES COMING OUT LIKE ANGRY SNAKES???also,I am only looking to use the tuner on the zoom,thanks in advance, A.Friend, PS,if this thread is in the wrong place,let me know where to put it and ill move it asap

yeah,first u wanna plug the blabla into the dadada,then run the dadada in to the effects out on the wawawa,then the bla to the da,....................come on guys,I have no clue what im doing here,anybody got any ideas

well really there isnt much of a way to do that sorry things always get a little messy honestly just remember zip ties are your best friend in this situation same thing goes when wiring a pedalboard except you also have shorter cables usually

no,i need the actual"what do i plug this into and what do i plug that into scenario"I am a newbee I geuss,im sure once i do it it will be like riding a bike,but i just dont know the how where and what,i got no manuals or i would look,thanks

If you mean where to put what pedal then unfortunately it's sometimes left up to you to experiment and see what's right for you however I'm sure some people here can give guidance as I've never used any of the gear you described but experimenting doesn't do any harm and is all part of the fun

You would got from your bass into the wireless transmitter, out of the wireless receiver into the tuner, out of the tuner into the svt3 and out of the svt3 into your cabinet. That's the way I would run it. Hope this helps.

NO,not where,more like what,input from the ampeg to the output on the wireless to the input on the zoom etc etc,how the hell do i wire this stuff,I got an audition for a top 40 country band tomoro night,been spending so much time learning the songs,and worrying about how my gear"looks"when I walk through that door,that I overlooked the most important thing,making my rig come to life.I have been sitting here for an hour and a half and I cant seem to get a peep out of this thing,there is no faulty stuff either,I tried it all on its own and its fine......

AUDIOGLENN,you nailed it my friend,absolutley perfect,souns awsome,11 pm,lets see what the neighbors think,just kidding,thanks a million though

Wireless out into Zoom input, Zoom output into SVT3 input. If your having problems getting everything to work together, and you don't have time to figure it out, I would remove each item piece by piece and see which isn't working with the rest.

As for keeping your wires in order, tie wraps and some of these work great http://www.homedepot.com/h_d1/N-5yc1...1#.UOj5WHcuI2w

even better,i dont even have 1 wire pluged into the front of this rig,so I am using the effects return on the back of the svt,the same as I would use the front input,whatever it is,its more than I was hopeing for,u guys are awsome,i am writing this wireing down for future ref,this is a forever, universal way to wire stuff,yall made my night,thank you

You might want to go into the front of the SVT (from either tuner or Zoom if being used) to pick up the sound of the tubes in the pre-amp. Best of luck tomorrow.

+1 The signal you feed may also be too quiet at the effects loop, it will probably make the amp louder when plugged in at the main input.

Glad to help out. Sorry I forgot to put the Zoom into the chain. Hope all went well with your audition.