How to make a pedalboard breakout panel
I recently sold a Pedaltrain PT-2 with a breakout panel which I installed. I received a lot of questions regarding why and a bunch of how to's, so I thought I'd post this thread. Before we get started, here's a photo:
I color coded them using these:
I did this a while ago, so I don't remember what size drill I used. Just make sure it's big enough to fit the jack through the Pedaltrain extrusion but small enough to leave some room to mount the jack's flange to the pedalboard. To mount the flanges to the Pedaltrain I used rivets. Measure carefully, twice or three times, even! Also, center punch the hole location centers to keep your drill from walking.
Also, please be sure to wear eye and hand protection. The aluminum can fly and the edges can get sharp. Don't want to damage those eyes or money-making hands!
Hope this helps you guys out!
Thanks! Wish I was as skilled as you are with these kinds of things....LOL!
First of my dumb questions..what is "jumper the amp" and "the 4 cable method" Thanks!
4 cable method:
|All times are GMT -6. The time now is 09:49 AM.|
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.