One of These Days on Boss GT 6B: Any Pink Floyd bassists here?

[jfh2424]

Hi guys, I am in a Floyd tribute band and I found out that I will be doing One of These Days. I own a GT 6B. Have any of you ever tweaked it to do this song?

I need a lot of help, I haven't used the GT 6B a whole lot.

Thanks!

John

[Deluge Of Sound]

Can it do delay and tremolo?

[bigchiefbc]

You're gonna want a bit of overdrive, an analog-voiced delay of about 330 ms, and then a triangle-wave tremolo with the depth maxed for the middle section.

[bassplayerbob]

Originally Posted by bigchiefbc

You're gonna want a bit of overdrive, an analog-voiced delay of about 330 ms, and then a triangle-wave tremolo with the depth maxed for the middle section.

Is this Roger Waters??????? I am assuming Bassist from Gilmours Breakfast???

[meekee73_2008]

i do the middle section with a bit of OD (T-rex bassjuice) into delay (tc electronic flashback) into tremolo (boss tr-2, with maximum depth and squarewaved to the max)

Michele

Originally Posted by jfh2424

Hi guys, I am in a Floyd tribute band and I found out that I will be doing One of These Days. I own a GT 6B. Have any of you ever tweaked it to do this song?

I need a lot of help, I haven't used the GT 6B a whole lot.

Thanks!

John

[gumtownbassman]

Here is a patch listing from the GT-10B, you could try entering these settings as best you can.. Mostly delay, plus Slicer on the CTL pedal.

Boss GT-10B Patch Summary Tue 15. Mar 22:57:27 2011

Patch name: ONE OF THES DAYS

Patch Mode Output Select = LINE/PHONES

**********Signal Chain**********
Input = [PDL] [CS] [OD] [PreAmp] [EQ] [NS_1] [DD] [CE] [RV] [FX1] [FX2] [FV] [DGT]

**********Compressor********
[CS: On/Off] = On
[CS: Type] = BOSS Comp
[CS: Tone] = 0
[CS: Effect Level] = 40
[CS: Compressor Sustain] = 70
[CS: Compressor Attack] = 20
[CS: Threshold] = 60
[CS: Ratio] = 4:1

**********Equalizer***********
[EQ: On/Off] = On
[EQ: Low Cut] = FLAT
[EQ: Low EQ] = 2 dB
[EQ: Low-Middle Frequency] = 500Hz
[EQ: Low-Middle Q] = 1
[EQ: Low-Middle EQ] = -2dB
[EQ: High-Middle Frequency] = 4.00kHz
[EQ: High-Middle Q] = 1
[EQ: High-Middle EQ] = 0dB
[EQ: High EQ] = 0dB
[EQ: High Cut] = FLAT
[EQ: Effect Level] = 0dB

**********Delay***********
[DD: On/Off] = On
[DD: Type] = Single
[DD: Time] = 328ms
[DD: Tap Time] = 50%
[DD: Feedback] = 30
[DD: High Cut] = 8.00kHz
[DD: Effect Level] = 120
[DD: Direct Level] = 87

**********Master***********
[Patch Level] = 104 %
[Master Low] = -2 dB
[Master Mid Gain] = 0 dB
[Master Mid Q] = 1
[Master Mid Frequency] = 800Hz
[Master High] = 4 dB
[BPM Master] = 120
[GT-10B Master Key] = C(Am)

***Noise Suppressor 1*****
[NS1: On/Off] = On
[NS1: Threshold] = 30
[NS1: Release] = 20
[NS1: Detect] = Input

**********FX-1***********
[FX-1: On/Off] = On
[FX-1 Select:] = PHASER
[PH: Type] = 4stage
[PH: Rate] = 32
[PH: Depth] = 73
[PH: Manual] = 55
[PH: Resonance] = 34
[PH: Step Rate] = Off
[PH: Effect Level] = 41
[PH: Direct Level] = 72

**********FX-2***********
[FX-2: On/Off] = On
[FX-2 Select:] = SLICER
[SL: Pattern] = P1
[SL: Rate] = 29
[SL: Triggr Sens] = 0

[jfh2424]

Thanks for the help, guys, I appreciate it!

John