PYPB 36:36 For the inside of the Tabernacle, Bezalel made...

[mjcantor]

BDDI is the dry signal (only the Octaver hits it, is the low end of my signal)
VT Deluxe is the wet signal (All the FX hit it, is the mids/highs of my signal) I use the Whammy's two outs as the splitter: Wet goes to the FX/VT Deluxe, Dry goes to BDDI)
Both DI outs go into the board, the 1/4" outs go into a small line mixer into the FX return of the amp for monitoring puropses. Since starting to use this setup, I've gotten nothing but compliments on my tone.

[G.Bisson]

Originally Posted by mjcantor

BDDI is the dry signal (only the Octaver hits it, is the low end of my signal)
VT Deluxe is the wet signal (All the FX hit it, is the mids/highs of my signal) I use the Whammy's two outs as the splitter: Wet goes to the FX/VT Deluxe, Dry goes to BDDI)
Both DI outs go into the board, the 1/4" outs go into a small line mixer into the FX return of the amp for monitoring puropses. Since starting to use this setup, I've gotten nothing but compliments on my tone.

Nice bi-amp setup. Smart idea.

[jucas]

Originally Posted by insomniac2295

What's that one in the middle?




I built the BB Preamp clone using the "Glitterrattii" PCB from MadBean Pedals. All the info on the project is in the linked project document. I then further modded it with the flexi clip project from DIY Fever. Which basically gives me a bazillion different clipping options. I can choose from 4 different types of diodes (Germanium, Silicon [stock], Rectifier, LED, and MOSFET), mix and match them, and use them to clip either side of the waveform in multiple different ways.

The one in the middle is randy's revenge, a ringmodultaor by fairfield circuitry.

I'd always meant to do somehting similar to that flexiclip project, but I thought it'd be worthwhile on the outside of the pedal as a rotary switch. Do you notice much of a difference other than in volume between settings?

[dbbxyz]

Mostly just lurk, but TB has been a super resource. Really appreciate everybody's generosity of info and insight. Thought I'd share my finished (I mean it....) board.

[beggar98]

How did we not go with a 36th Chamber of Shaolin reference? Do you not fear my Wu-Tang sword?

[insomniac2295]

Originally Posted by jucas

The one in the middle is randy's revenge, a ringmodultaor by fairfield circuitry.

I'd always meant to do somehting similar to that flexiclip project, but I thought it'd be worthwhile on the outside of the pedal as a rotary switch. Do you notice much of a difference other than in volume between settings?

It's kind of hard to tell in a band setting. For the most part, there aren't a whole lot of differences, just really small ones.

[Dr Greenthumb]

Latest update, IE Nimbus on the way:



BDDI->GR2 with all these in the loop: Foxrox Octron->W&C PPB->IE Oxide->Blackout Effector Mantra OD->Ibanez Tube King, Darkglass B3K, and then the Diamond Bass Comp->EBS Unichorus->EHX vintage Small Stone->Boss DD-3 into my M9/PH212.

[jucas]

Originally Posted by insomniac2295

It's kind of hard to tell in a band setting. For the most part, there aren't a whole lot of differences, just really small ones.

Yeah, I'd found the same when I have a circuit on breadboard but always wondered if that hid some of the differences.

[My name is Mudd]

Originally Posted by dbbxyz

Like the dice!

[dbbxyz]

Originally Posted by My name is Mudd

Like the dice!

Thanks Mudd. Form and function...the extra height really increases the 'stompability' in tight spaces...like a riser.

Also it let's me work the freeze with my heal on the ground...without doing the Karate Kid dance.

[mjcantor]

Originally Posted by G.Bisson

Nice bi-amp setup. Smart idea.

It's perfect for the stuff I'm doing in my current gig, because I need the big lows that only the BDDI can give when clean, but then I can get some quasi-Justin Chancellor, Dug Pinnick, and Tim Commerford tones out of the VT so I can keep a big low-end, while filling in for the fact that there's only one guitarist in the band so I'm filling a lot of sonic territory. The sound man can mix the two for what sounds best in the house, and I can mix the two for what sounds best through the amp. It's a win-win.

[HolmeBass]

Originally Posted by Smallequestrian

Nice rig!

[Daniel Piper]

Originally Posted by ZanaZulu807

Here's a pretty crappy shot of mine...



.

Colossus!!

Sub-Lime

Yum

[kester]

waiting for a HOG and a timeline to complete this board!

the memory boy is where the timeline will be and the giant empty space is for the HOG. hopefully the measurements I found online are correct.

[surfingbird1]

Originally Posted by kester

waiting for a HOG and a timeline to complete this board!

the memory boy is where the timeline will be and the giant empty space is for the HOG. hopefully the measurements I found online are correct.

tell me NOW where you got the polytune mini

thank you !!!!!!

GREAT BOARD!

[Basehead]

Originally Posted by kester

waiting for a HOG and a timeline to complete this board!

the memory boy is where the timeline will be and the giant empty space is for the HOG. hopefully the measurements I found online are correct.

That, my friend, is one bad-a$$ board!!

[Smallequestrian]

Originally Posted by HolmeBass

Nice rig!

Thanks, its really quite the little powerhouse!

[Smurf-o-Deth]

Originally Posted by beggar98

How did we not go with a 36th Chamber of Shaolin reference? Do you not fear my Wu-Tang sword?

[Jared Lash]

Originally Posted by beggar98

How did we not go with a 36th Chamber of Shaolin reference? Do you not fear my Wu-Tang sword?

Yes. A thousand times yes.

Tongue in cheek ODB-3 references would abound.

PYPB thread title I am disappoint.

[dharmashawn]

Originally Posted by Jared Lash

Yes. A thousand times yes.

Tongue in cheek ODB-3 references would abound.

PYPB thread title I am disappoint.

Appy-polly-loggies.
With this being sub forum 36 and V.36 I found this from Exodus 36:36.
I shall return at a later date with a truly great thread title.
Can you find it in yr heart to forgive me??