Originally Posted by nubs
been looking at pickin one of these up. checked the users manual today and it looks like in order to use the individual input channels for two settings i would have to plug the different basses directly into the channel....
for instance if i want a mix for my Tbird as the main instrument i set it up in input 1, then if i wanna use my PBass i set it up in input 2. so does that mean i have to swap my instrument cable from 1 to 2......can i use a "Y" type splitter so i can just swap basses and not switch my cords around on my pedal board....thanks for you help.
No, you don't have to swap the cable on the 'Bone. Just unplug from one bass and plug into the other. Stomp the Channel Select to switch the channel.
From the manual ...
"USING THE BASSBONE WITH ONE BASS
Start by making your connections as described in Section 4 and make sure you are connected to input-1. Bassbone automatically feeds both channels when the input-jack on channel-2 is not used.
As discussed earlier, when only using one bass, the Bassbone can be used like a 2-channel pre-amp whereby one can transition between channel-1 and channel-2 by simply depressing the toggle switch."
One cable, two basses, two channels.