Small Clone owners: Help Please!
I just bought a US model EHX Small Clone and the depth switch was/is broken. Upon inspection, it appeared that someone had stepped on the depth switch as the bottom of it was pushing away from it's metal housing. I used a pliers to push them back together and the switch is once again tight. However, when I change modes, there doesn't seem to be much difference in the sound. I'm unsure if the depth switch is that subtle or if something is still wrong. I'm wondering if the previous owner changed the wiring or if perhaps the switch is still broken on the inside.
Here's where you come in. To answer my question about the wiring, I'm looking for someone to post a picture of the switch and it's wiring so I can compare it to mine to make sure nothing has changed. If that's not the problem, I might try a new switch. Thanks.
Last edited by burl0029 : 03-02-2010 at 10:45 PM.