Suggestions for mounting line6 expression pedal?

[kesslari]

It's got rubber feet, and the screws that hold them in seem to be the ones that hold the pedal together.

This is my first board-building - any suggestions for attaching that puppy to the board?

[TrevorOfDoom]

velcro FTW!

[mixerman]

Originally Posted by TrevorOfDoom

velcro FTW!

Umm... I'm assuming that he's actually asking about how to Velcro it down because the feet are there.

I don't have one of these, so I can't give a definite answer, but have you tried removing the feet trying to use the screws that are already there? If the hole is too big, you could go to the hardware store and get a washer for it. If the screw is too long, take the screw to the hardware store and try to find a shorter one with the same threading.

.... This post is begging for somebody to say "That's what she said"

[rratajski]

Cut the velcro to fit on the feet...ala EHX or ProCo pedals...

As long as you don't abuse the pedals and your board, everything will stay stuck to where it should be.
I've done it on my old EHX Bass Micro Synthesizer, EHX XO BMS, and ProCo RAT. My g****rist does the same thing w/ 5 of his pedals...

[McHaven]

Try taking out the screws and removing the feet? Then the screws should be pretty flush with the bottom of the pedal and you can velcro it.