Tech21 VT Bass DC2 Power Adapter
 

My new v2 model just arrived.

Q: does anybody own a DC2 power adapter?
I'd like to know the output voltage, and if Center Hot or Center Ground.

It would be nice to use a single 9v supply to power my Boss TU2 and the VT Bass pedals.

Well, just going by the picture of the DC2 on Musicians Friend it appears it is a center negative 9vdc wall wart. It should work fine as long as the connector is the same as a Boss (which it looks like it is).

http://www.musiciansfriend.com/acces...2-power-supply

I mean, all I did was look up the Musicians Friend page on the DC2 and looked at the picture of it.

I just remembered that I have a DC2 left over from when I had a Bass Driver DI. The connector fits in my own Boss TU2 tuner perfectly and powered it right up.

Thanks for the reply.
I need to acquire either a DC2 or similar supply for the new VT Bass and TU2 tuner.

Well, I'd say any of the Boss-compatible psu (power supply units) will work. Either the Tech 21 DC2, or the latest Boss gadget, or most likely any other one that will work with Boss-type pedals will work.