Originally Posted by michaelstrand
Can the 5 and 6 outputs of the PP2+ power two 18v pedals? if not I would need to order the Y-shaped 2-to-1 cables to use two outputs to power each of the 18v pedals.
No, none of the outputs by themselves can deliver 18v. You can use a Y-cable for each pedal, using two outputs for each pedal, but first you need to check the draw requirements of those pedals (expressed in mA). Bridging two outputs with the Y-cable allows you to add the voltages together, but the draw doesn't work that way. Two 100mA outputs bridged together is still 100mA. Most of the outputs on the PP2+ are 100mA. 5 and 6 are 250mA.
Hope this helps.