Will EHX send me a schematic?

[Thumpin_P]

Hey guys...

Normally, I hang out in the Luthier's Corner, but, i am stumped with a problem.

I own a vintage EHX Bass Micro Synthesiser. When it was given to me, there was a stomp switch ( I believe for bypass) and an extra jack, on the side of the chassis. The bypass never worked, well, for me anyway. As I am at Roberto-Venn, I have some people who are savvy with pedals. I thought that it would be the right time to make a bypass work. Well, we are all stumped at this point.I have tried several different ways of wiring the new switch in, and now... I have no power. Is it possible to get EH to send me the original schematics, so that my pedal savvy instructor could help me to get it back in shape. I ask, also, because, there were a couple of extra wires soldered to the board.

Any help is appreciated, and I will try to get some pictures of my so-called mod in a few days.

Thanks again,

Thumpin_P

[father of fires]

There's a link to the schematic on this page:

Index of /diy/Schematics/Guitar Synth and Misc Signal Shapers

Good luck!

[Thumpin_P]

Wow!!! Thank you! You are the man!!!! I will get started on this after the Christmas break.Again, Thank You!!!!!