100k pot center detent
Trying to find a couple 100K pots with center detent for a through body application. Needs 5/16" bushing or more. Preferably Alpha, Bourns, CTS, or NGK, needs to be better quality. The center detent part is what I can't find at Mouser, Digikey or Amplified Parts and the CSR's are pretty useless,
Any help would be greatly appreciated
I found this by searching for "center detent potentiometer":
No value mentioned though.
Not exactly what you want, but if you can find the manufacture's data sheet for that part,
you can find a part number for what you want, and then search for that.
Fender uses a 100k w/center detente for their active circuits but the bushing is just shy of your requirements at 1/4". Their part number is 004-9443-000 and you can get them at basspartsresource.com or mojotone.com.
There are also Alpha PCB mount equivalents on ebay but also with 1/4" shafts.
Maybe there's a way to "finesse" that extra 1/16" so you can use common parts (1/16 or 1/8" counter bore to fit the diameter of a typical mini pot?). I know that's the equivalent of "don't raise the bridge, lower the water" but it may be a cheaper faster alternative.
Either way, good luck!
Thanks for the replies, Yes, the ones Fender sells are just not enough thread. Thinning the top to accomodate the pot can lead to the top becoming weak around the pot
|All times are GMT -6. The time now is 08:51 AM.|
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.