I've used the search engine on this topic, but to no avail. I'm working on a new set of Nordstrand Dual Coils. I'm looking for a wiring dgm for a 4-way rotary switch that will give the owner, for each 4-wire pickup: 1) coils in parallel, 2) coils in series, 3) inner single coil, and 4) outer single coil. He wants a rotary switch for each pickup. If I'm rehashing an old, much-answered topic, I apologize. Thanks in advance. ~Pete
Replace "bridge" and "neck" with "inner coil" and "outer coil." I suspect that you might also need to switch the wiring numbers around based on your design.
__________________
Quote:
Originally Posted by McThumpenstein
I don't think the wife would buy the "I need to take off this knob and put a whole new bass under it" story.
I'm working on a new set of Nordstrand Dual Coils. I'm looking for a wiring dgm for a 4-way rotary switch that will give the owner, for each 4-wire pickup: 1) coils in parallel, 2) coils in series, 3) inner single coil, and 4) outer single coil. He wants a rotary switch for each pickup. If I'm rehashing an old, much-answered topic, I apologize. Thanks in advance. ~Pete
