Bart preamp wiring. Help please with the yellow wire !!

[jibreel]

To much twisting and turning and a wire came loose. This is the NTNB 918F. With push/pull active/passive vol pot. All the diagrams show standard pots. My question:

Where to the two yellow wires go. The one between the blend and vol pot in the pic I just soldered in and I may be wrong. From the diagrams, it looks like the yellow wire from the pre goes to the bottom lug on the blend pot.

Thanks tons for help.

[ex-tension]

You're correct. That loose yellow wire goes to the bottom lug of the push-pull switch (the lug under the other yellow wire).
The wire between pots is also correct.

[jibreel]

Originally Posted by ex-tension

You're correct. That loose yellow wire goes to the bottom lug of the push-pull switch (the lug under the other yellow wire).
The wire between pots is also correct.

Thanks !!!!!