Warning: total noob here.
Today I finished building my first custom bass, and I love it. Just one problem though, whenever I'm not touching the strings (or any other metal part of the bass for that matter) the amp buzzes? If I touch a pole piece in the pickups the buzz gets louder. Also, if I turn the tone knob completely off the buzz stops.
It's a precision style bass with passive Wilkinson WPB pickups in it. Everything is wired correctly according to the schematic from the I have. Everything is grounded correctly. I can't seem to figure out what is causing it.
Any suggestions guys?
If I add a ground 'lug' like on the Fender schematics would that solve the problem do you guys think?
Bridge grounded? Make sure all grounds go to all other grounds....maybe you missed one.
Thanks for the quick reply!
Everything is grounded, yeah. I have no idea what it could be. Beggining to think it could be a sheilding issue, possibly?
Your volume and everything else works as it should? Are you getting full volume?
If so, it sounds like it could be a shielding issue. I would suggest you take it to a tech because sometimes even if you follow a wiring schematic, you will find that the schematic is still not complete in terms of grounding and shielding. A tech would know where to add extra ground wires and/or shielding.
Doesn't sound like a major problem.
Yeah volume works fine; the bass seems to be really loud for a passive bass too.
Will do, cheers guys!
|All times are GMT -6. The time now is 12:32 PM.|
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.