conecting pickups to same output and tone

[peaveyuser]

could anybody give me a diagram of how to do this? I'm thinking of buying two different pickups on ebay and i want to see if i can do it before i buy them.

[peaveyuser]

Ok maybe i should be more descriptive this would be my first wiring job for a bass. Now this is purely for fun so everything doesn't have to be great quality because i'm attempting to make a joke custom bass. i want to be able to connect 2 lp style humbuckers ( they're cheap knockoffs) to one output. Now i'm not sure what type of pots I'll need but would these work?
http://cgi.ebay.com/ws/eBayISAPI.dll...4850&rd=1&rd=1
and i would use this output
http://cgi.ebay.com/ws/eBayISAPI.dll...7808&rd=1&rd=1
Also will i need any other materials to do this job besides more wire?
Now if that won't be able to work I'll just use one of these pickups
http://cgi.ebay.com/Wilkinson-Lic-Pi...QQcmdZViewItem
connected to the same pots and input but then again i'm not sure if that will work either.

[RyreInc]

Questions first:

Do you want 2 volumes (1 for each pup) or just a master volume?
Do you want to select pups, and if so, do you want a blend knob or a switch (note that 2 volume controls would also accomplish this)?
Do you want a tone knob?

This is a very basic question, I'm sure you could find a bevy of info by performing a search for a schematic.

[peaveyuser]

2 volumes and a tone knob, no switches.

[RyreInc]

http://www.fender.com/support/diagra...136200APg2.pdf

[peaveyuser]

Thanks a lot.

[peaveyuser]

Just one more question what is the black wire (ground) from bridge, what is it connected too?

[RyreInc]

It just goes to the bridge, and sits between the bridge and the body. This grounds the bridge and the strings, which is very imporant.

[vindy500]

youre describing a jazz basses preamp