EMZ HZ pick ups problems ... help

[jzonbass]

I have a spector euro rebop with tone pump I'm have a buzz when the treble is turned up high still has great tone but has hum/ buzz, checked all wiring an no brakes , I change output jack and still have problem. Can any one help.... thanks

[Vakmere]

Its supposed to buzz when the treble is cranked to max. Nature of the beast with HZs. Even when I had DC45's in my Euro 6er the treble would buzz a bit if I over did it. It was not due to a malfunction of the preamp in the bass. Solution is to stop maxing out the treble on your bass. Not needed that high anyway. Run the treble at 12 o'clock on the bass and raise the treble on your head instead. You shoud not have hum. Hum is something else. Buzz sounds like static on a bad radio station. If you are trying to achieve a certain sound from a band you like then look into using D'Addario XL strings. Pretty good match on a Spector.

[DiabolusInMusic]

Does the buzz go away when you touch the strings/metal/bridge, does it get louder or does it remain constant?

[Vakmere]

I don't know does it?

[grendle]

Thats from the tone pump being hot. if its a trim pot pump turn it down to about 3-4 and then you can use full boost with no noise. they usually ship hot at around 8-9. That was an issue with a lot of the non trim pumps in them being way too hot. I run mine at about 3 but also run it at full boost, It drives my ampeg pre nicely at that level.

[jzonbass]

Originally Posted by DiabolusInMusic

Does the buzz go away when you touch the strings/metal/bridge, does it get louder or does it remain constant?

the buss is constant goes up and down with treble nob