TalkBass Forums

TalkBass Forums (http://www.talkbass.com/forum/)
-   Pickups & Electronics [BG] (http://www.talkbass.com/forum/f38/)
-   -   ESP Ltd B-50 grounding problem (http://www.talkbass.com/forum/f38/esp-ltd-b-50-grounding-problem-948928/)

Mickkey 01-15-2013 08:20 AM

ESP Ltd B-50 grounding problem
 
Hello all. I have been lurking around the board for about two years now, but never had anything to contribute witch is why this is my first post/thread.

I have encountered however a problem with wich I cannot deal myself. I have been doing a lot of online searching and nothing sprang up.

I have decided to build a Tillman F-fet preamp for my bass and swap the tone boost with the preamp. Everything turned out great, the bass sounded awesome and I was very happy.

This is the freaky part. After installing the preamp I tested it and it worked. After that I played for half the night and everything was great - not a single problem. I packed the bass into a gig bag in the morning, took it with me to another city, never took the bass out for a week, came back with it and plugged it in to the same amp I was playing when testing. This time the bass sounded weird. I am now un-happy.

I'm not sure it's the grounding because touching the strings and bridge does not change the buzzing. It almost seems as if the pickups are overly sensitive because if I touch the A and E strings veeery lightly the buzz starts. As if the slightest vibration of the strings is being picked-up.
Also the signal is about half as loud as it was.

I have tried it on a decaying battery, on a new battery (both measured), without the whole pre-amp, with a new pot and without the pot (signal and bridge/ground straight into jack).
The only time the bass acted o.k.was with the 'no-pot' option.
The moment I solder the bridge/ground onto the pot, from the pot a wire into the jack - buzz. No difference at all with or without the pre-amp. Only thing is that with the pre-amp and no battery there is almost no sound at all witch is as should be.

There is also this : since this buzz thing started there is this soft popping sound when the pot goes all the way up or down.

I now have no idea what could of happened and decided to seek (& destroy;)) help. If any one here has any ideas at all please help me out. I live in Poland so if do not reply right away it might be because of the time difference.

Thanks and cheers !

Mickkey 01-22-2013 01:41 PM

Bump?


All times are GMT -6. The time now is 10:34 PM.

Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.