TalkBass Forums - Installing an Aggie OBP3 in a Skyline 55-01 w/ Barts

TalkBass Forums (http://www.talkbass.com/forum/)

- Pickups & Electronics [BG] (http://www.talkbass.com/forum/f38/)

- - Installing an Aggie OBP3 in a Skyline 55-01 w/ Barts (http://www.talkbass.com/forum/f38/installing-aggie-obp3-skyline-55-01-w-barts-944929/)

firstbass45

01-01-2013 04:30 PM

Installing an Aggie OBP3 in a Skyline 55-01 w/ Barts

I was trying to install an OBP3 in my Lakland Skyline 55-01 and now I have no sound at all. Anyone have any suggestions as to what to look for to solve this problem?

mmbongo

01-01-2013 06:33 PM

Make sure your jack and battery are wired correctly first. Then check and make sure you have signal going into the preamp.

FunkyMan

01-02-2013 12:11 AM

I had the same problem, make sure to check that the ground poinst are correct, and the balance pot is wired correctly

mmbongo

01-02-2013 06:19 AM

Yeah don't follow the wiring diagram for the blend pot that Aguilar provides. It does not work. Use the diagram from StewMac.

All times are GMT -6. The time now is 01:56 PM.