pickup screw loosening
I have a P bass and one of the screws on the pickup starts coming loose all the time. It's not a big deal, but I have to remember to tighten it every few days or else the pickup starts slowly but surely lifting up towards the strings.
and one time during a show by the last few notes of the last song it was rubbing up on the low E!
(well, that's when I noticed it happens.)
Any suggestions to keep it from loosening?
i was thinking maybe a drop of crazy glue or something?
Fill and redrill the hole.
Make sure you put baking soda in the hole before the crazy glue goes in. Then pack it down and repeat the process two or three times until the hole is completely filled.
Two other thoughts having just installed a set myself.
1) reduce the hole size a bit with a little wood glue and toothpick. This will create more friction in the screw hole itself which will help prevent the screw from turning. And old, simple and effective technique on any small hole.
2) be sure you have enough of some sort of foam beneath the two pickup halves that will create some steady upward pressure against the screw heads. It will both steady them and stop any pickup rattling as well.
If a toothpick is too big break it and peel away a sliver.
Or, you could use the point of a flat toothpick if a round one is too thick.
Before you do any of that.
Is it possible that you just need a longer pickup screw? If you have the pickup really high, or if you don't have the correct screw to start with, it's possible you could fix the whole problem with the correct length screw.
I'm not suggesting you just put a longer screw in regardless, only that there's a chance the screw is just too short.
If the screw is mounted in wood, the above suggestions may solve your problem.
If its a screw into a threaded mount, then you want LoctiteŽ Threadlocker Red 271™. I had the same problem with a Musicman Sterling, that you're having with your P Bass. I'd screw the pickup down to where I wanted it, and over the course of a gig or rehearsal, the pickup was touching the G and D strings. I fired an email off to Musicman, they suggested Red Threadlocker, and I never had the problem again.
Just keep in mind that there's two types of Threadlocker—Red 271 can be loosened with hand tools—and Blue 242 requires heat to loosen the screw.
Thanks everyone for your help.
I'll let you know if it works.
am i a jackass?
are these screwed into wood?
they are into wood.
thank you everyone.
i feel like Randy Rhoads...I just want to play, I don't want to know how the thing works!
If in wood a toothpick and glue, if it's the metal foot of the pup it's self lightly tap it with a hammer to close up the hole some or use lock tight.
It was an easy fix!
I found longer pickup screws and that totally solved it!
They are nice and tight now.
Thanks everyone. Thanks Major Softie, that was the easy answer!
|All times are GMT -6. The time now is 04:08 PM.|
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.