Sadowsky pre-amp problem.
I put a Sadowsky pre-amp with VTC in my USA Deluxe Fender preamp. Vol/Pan/BT/VTC with push/pull passive problem. I installed the prewired preamp so any issue with wiring would be my fault, not Sadowskys;
It worked perfectly for about a year. It isn't my main gigging bass so it hasn't been abused or knocked around. I noticed a a lot of static and loss of the bass/treble control. Pan works normally, the noise drops out completely when switched into passive mode and the VTC works as it should.
I opened it up and don't see and loose connections. The battery is fine. I'll open it up and peruse the guts when it's due for a string change but was hoping for some thoughts.
Sounds like a battery to me but you already covered that. Give Roger a call or an email, no doubt he will set it straight.
If not the battery, I would suspect a bad ground
|All times are GMT -6. The time now is 06:44 AM.|
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.