| Hmm..
Your uncovered is probably a strip of copper on the bottom of the pickup. Combine that with the bridge ground when you make that connection or do not connect it at all. I would assume that should be grounded though, and the audere does not ground the pickups at all through the common or hot. That is solely done through the bridge ground and out to the jack.
The black is your Hot then.
Green is your common.
So just to be sure..
Combine your uncovered and bridge ground to the audere crip connector.
Green goes to the Common.
Black goes to hot. Combine and connect your Red and White wires, I recommend Soldering them.
__________________
"But lay up for yourselves treasures in heaven, where neither moth nor rust doth corrupt, and where thieves do not break through nor steal:" Matthew 6:20
| 
