Warwick FNA Trim pot help

[bass_in_ur_face]

i have an old Warwick FNA and it has the two trim pots on the inside back but i dont know which one does what?

[grifff]

http://warwick.de/modules/infos/info...ID=14544&cl=EN

Do you already have a copy of the manual?

[bass_in_ur_face]

no i dont and its a disontinued model

[bass_in_ur_face]

i just know it has two trimpots and justed wanted to knowhowto work em, but themanuals arenthelping

[Caca de Kick]

If this is the original FNA with just the single MM style pickup, then the preamp is made by seymour duncan, and is very similar, if not the same as the one they sell as a Musicman replacement. So you shold be able to look at their site for how to adjust the trim pots.

I used to have one of these FNA's ack then, and the preamp burned up. I picked up a spare SD preamp, but at that time the store agreed to take the bass back.

[bass_in_ur_face]

so whos website do i go to?

[bassman515]

I have the same bass...one of them adjusts the bass and the other the cut in the mids when you pull the slap countour knob...I will see if i can find it and redo this post or post another
Jeremy

[bassman515]

OK...so I think that the one on the outside is the mid cut and the one on the inside is the bass boost...

here are the frequencies
bass cf: 20hz q: 0.67 range: +/- 20db
mid cf: 578hz q: 0.54 range: +/- 9db
treble cf: 6.6khz corner shelving type range: +/- 20db

slap bass boost cf: 83hz q: 1.79 +3db to + 9db
slap mid contour cf: 633hz q: 1.12 -3db to -11db

Hope this helps,
Jeremy

[bass_in_ur_face]

sweet man thnx

[bassman515]

No problem...good luck!