where do i solder the green and the bare wires to for my neck and bridge pickup. also where do i solder the bridge ground wire. my pickups up are bartolini mk american replacements
There are probably many wiring pics out there, but I don't know where they are, either. I could use to bookmark some, as I need to do some wiring work myself.
that would be kinda helpful but i really just need to know where do i solder the bridge ground wire and the green and bare wire from the pickups. and do i have to do anything with the gold plates under the pickups
Be a little bit more specific....... it should have a model #?
And what bass are you doing this with..... a jazz bass?
See if your pickups are listed here..... http://www.bartolini.net/information..._bass_pu_s.htm
__________________ ~~~~~~~~~~~~~~~~~~~~~ AV-57-Reissue Precision bass
SVT4-Pro into a Schroeder 21012R ~~~~~~~~~~~~~~~~~~~~~
This is very fundamental stuff you're talking about here. If you don't understand it to the degree that you started 2 threads about it, maybe you should just bring it to a professional.
__________________
Quote:
Originally Posted by fdeck
Of course I plug my little amp into a power system known in the industry as THAT OUTLET OVER THERE. :D
The green(ground) and bare(shield) both get soldered to the back of the volume pot. The brass plates are shields and their wires should be also soldered to the back of a pot or grounded.
