What pots and capacitors should i use for converting my active bass to passive?

[danielfnj96]

So the deal is i have an Ibanez SR300 that i want to wire similarly to a jazz bass (volume/volume/tone) or possibly with a 3 way switch. The first problem with my plan is that i'm not sure if i need 250k pots, 500k pots, 100k pots, or something else. Secondly i don't know if i'm going to want to use a 0.047uf capacitor, a 0.1uf capacitor, or something else. I want the pots to act fairly standard and i like the tone knob to be able to roll of as much as possible without loosing volume. The current pickups are the standard Ibanez Soapbar Humbuckers wich i have hear have low output without the preamp, the preamp is one of those weird tone shifter ones with the funky mid scoop-mid hump knob. If anyone could give me some advice it'd be much appreciated. Also i forgot to mention i may change the pickups at some point but i'm not sure of whether or when that will happen.

[dmusic148]

It really doesn't matter that much, but 500's will be better with humbuckers unless you like a dark tone. The .047 cap is fine.

[Dan55]

Yep, if you're going with J bass passive pickups, 250k pots and a .047uf is what you want. Humbuckers, what dmusic said.

Dan