Originally Posted by line6man
The volume pot is not wired properly.
You should have the signal hot going to the first terminal, the second terminal (the wiper) going to the preamp, and the third terminal grounded.
I didn't include the specifics of the volume pot since it was prewired. I took a picture of it to maybe give a better image of what it looks like
Grounds on the volume pot: black from preamp, black from bridge, green from jack, unshielded from gray wire, and red from silver unshielded from pickup
The silver wire on top contains the hot and ground from switch, which goes to the volume ground (as mentioned before) and node.
The jack has the ground from the battery, green from volume ground, and the orange from the preamp.
The ones i am unsure of are the orange and black from the preamp. I just couldn't think of anything else to do than put the orange to the jack and the black to the volume ground.