bracing in 1/2 cab

[vilgo]

hi everyone

i read about the 1/2 diy cab but couldn't pix of what kind of bracing (and how much) you guys have used

any chance of some inside cabs if you have them handy
that would help a lot
thanx
pascal

[Greg Clinkingbeard]

Pascal,

I presume you are talking about this:
Bye Bye Wizzy 10

Based on this:
http://personalpages.tds.net/~fdeck/bass/smallbox.pdf

Sorry, but I didn't take any pics of the insides and since the driver is permanently sealed to the baffle, I can't take any for you.

I built mine out of 1/2" birch plywood and used a single 1" vertical brace centered on the back. It is simply put together with titebond glue and 18 gauge 1-1/4" brads.
There are 1" strips glued to the inside to which the baffle is attached.
Damping material is:
http://www.bltsound.com/index.php/ca...mping-material

All of the parts also came from bltsound.

I also loosely packed it with poly fiber from the hobby store.

Feel free to PM also.

Good luck.